MSA Timing Strut - with Custom Bracket

This is a carbon fibre timing strut for competing in MSA sprints and hillclimbs. This provides a straight edge at the front of the car for the purpose of cutting the timing beam.

This component is made up of; carbon fibre strut, carbon fibre bracket, hardware for fitting. We strongly suggest that to mount this, you use both the provided double sided tape and at least 1 bolt.

MSA rules require the strut to be matte black, therefore as standard the part will be painted before being shipped. If you wish for this to be left unpainted, then please contact us.

All timing struts are made to order, and require the height between the ground and the mounting surface on the car to be provided.

A standard 90 degree bracket is also available in our shop ( e.g. for mounting onto a numberplate).

Upon ordering, when you get to the checkout stage, please inform us of the distance from your mounting surface to the ground, and the required angle of the carbon fibre bracket so that we can ensure the strut is made to the correct dimensions